Amplify Your Wifi Signal, Beer Style

DatSucks August 9, 2011 8

If you are not satisfied with the range of your WiFi signal antenna, this method may work for you. To do this, all you need is a tin can from beer or other drink, scissors and follow these instructions. Also, let us know if this works for you.

Source: Live Journal (somewhere)

8 Comments »

  1. Alison August 10, 2011 at 5:19 pm - Reply

    What if you don’t have a wifi router like in the image example? I have a laptop that has a built wifi signal detector.

  2. Jon Coffin August 11, 2011 at 8:00 am - Reply

    Then that wouldn’t be a router fucktard!

    • Alison September 3, 2011 at 10:41 pm - Reply

      To Jon Coffin:
      Yes, this fucktard already figured it wouldn’t work near my laptop. For all I know there could be another method for a laptop signal.

  3. Huck August 27, 2011 at 6:35 am - Reply

    Good one. As the dude says …”obviously your not a golfer”

  4. northstar August 29, 2011 at 3:41 pm - Reply

    great comments. lmfao. will try it to hook up my deadbeat neighbor. only roadblock is that i have been drinking bottled beer lately.

  5. northstar August 30, 2011 at 7:36 pm - Reply

    works like a dream. I used a labatt’s blue light can. the beer went down smooth and the empty doubles signal power in the direction i point the open part of the can. turns out you dont need to clean out the beer can to make this work

  6. darren February 16, 2012 at 11:01 pm - Reply

    i have a usb wifi and i ran the wire in the hole of the beer can and i went from 11mps to 36mps thank you for the tip its great.

  7. me January 8, 2013 at 5:41 pm - Reply

    yeah, it works

Leave A Response »